Our other products
SC 50 / 75 A SC 50 / 75 T
Accessories for SC 45TW &
SC 15TW
[Back to Scanjet's home Page]
is a tankcleaning machine specially developed for:
Scanjet SC 50 or 75 T
The machine is mediadriven by means of a fixed installed turbine with an integrated programmable drive unit.
Full versatility is provided by free selection of single nozzle or twin nozzle type of system and multistage nozzle levels give a tailor-made installation for each specific vessel.
The nozzle(s) directing the cleaning media perform a horizontal spiral motions giving a single or crossing helical pattern with a perfect cleaning result even in areas below horizontal stringers, longitudials, corrugated bulkheads etc.
| Supply Pressure MPa | Nozzle dia 8 mm | Nozzle dia 10 mm | Nozzle dia 12 mm | Nozzle dia 14 mm | Nozzle dia 16 mm | |||||
Flow m3/h | Jet length | Flow m3/h | Jet length | Flow m3/h | Jet length | Flow m3/h | Jet length | Flow m3/h | Jet length | |
| 0,6 | 4,8 | 9 | 7,4 | 10 | 11,5 | 12 | 17,3 | 14 | 21,3 | 17 |
| 0,8 | 5,5 | 12 | 8,3 | 14 | 13,1 | 16 | 19,2 | 18 | 28,8 | 22 |
| 1,0 | 6 | 13 | 9,2 | 15 | 14,3 | 17 | 21,3 | 19 | 29,4 | 25 |
DESIGN SERVICE
Our project department is ready to assist shipowners and shipyards with an optimal design study including shadow diagrams prior to installation.
Following drawing material is required:
General arrangement, midship section oiltight bulkheads, longitudial sections, horizontal stringers, steel structure in non-typical tanks, pumping arrangements and piping arrangement.
SCANJET MODELS SC 50 T AND SC 75 T
These machines are produced in stainless steel according to owner's specification and are turbinedriven by the cleaning media
MODULAR SYSTEM
The machines are built as a modular system where various features can be selected to suit a special tank configuration or ship's operation in general.
Tankcleaning machine SC 50 T and SC 50 T | |||||
Drive unit model | 200 | 210 | 220 | 230 | 240 |
Self-lubricated gearbox | * | * | * | * | * |
Adjustable speed | * | * | * | * | * |
Cofferdam | * | * | * | * | * |
1 preset program | * | - | - | - | - |
3 preset programs + prewash | - | * | * | * | * |
Sector cleaning | - | - | * | - | * |
Magnetic transmission | - | - | - | * | * |
|
SINGLE OR MULTISTAGE CLEANING LEVELS One single nozzle cannot allways give an acceptable cleaning result. Corrugated bulkheads,longitudinals or horizontal stringers can shadow areas and should also be cleaned underneath. Each cleaning machine can therefore be individually designed to optimize the cleaning result. |
SINGLE LEVEL | TWO LEVEL | THREE LEVEL  | FOUR LEVEL  |
TWIN NOZZLE  | TWIN NOZZLE  |
GENERAL ADVANTAGES: